JennAir Refrigerator Dispenser Problems [Solved]

Have you ever had problems with Jennair refrigerator dispensers?
If yes, then you probably don’t want to hear the bad news.
The problem is that they are very expensive and often unreliable.
Jennair has been around since 1960 and is now owned by Whirlpool Corporation.
They manufacture refrigerators, freezers, dishwashers, washer/dryers, cooktops, ovens, microwaves, and other appliances.
Jennair refrigerator dispensers are designed to dispense cold or hot water from the top of the fridge.
They are usually connected to the faucet and are controlled by a switch located near the door handle

JennAir Refrigerator Water Dispenser Not Working – What to Do

1 Check if the refrigerator door is open or closed. 2 Make sure the water dispenser is turned off.

1. Water Supply Tube

1. Check if the refrigerator door was left open or closed. If the door was left open, check if the ice maker is working properly. 2. Turn off the water supply tube. 3. Remove the water supply tube from the refrigerator. 4. Clean the water supply tube using soap and warm water. 5. Reattach the water supply tube to the refrigerator. 6. Press the button to turn on the water supply tube.

2. Water Inlet Valve

Check if the water inlet valve is leaking. Remove the water inlet valve from the faucet. Clean the water inlet valve using soap and warm water and reattach it back to the faucet.

3. Dispenser Control Board

Check if the dispenser control board is working properly. Disconnect the power supply cord from the wall socket. Turn off the water flow switch located on the top of the dispenser control board.

4. Dispenser Switch

Check the dispenser switch for continuity. 5. Water Flow Valve Answer: Turn off the water flow valve located on the top of dispenser control board.

5. Door Switch

Turn off the door switch located on the bottom of dispenser control board 6. Drain Pump Motor Answer: Disconnect the drain pump motor from the dispenser control board. Remove the drain pump motor from its mounting bracket.

6. Water Filter

Remove the filter cartridge from the water filter. Clean the filter cartridge with a soft brush or cloth. Replace the filter cartridge into the water filter. 7. Drain Valve Answer: Turn off the water supply to the dispenser. Open the drain valve located on the top of the dispenser. Close the drain valve after draining.

JennAir Refrigerator Ice Dispenser Not Working – How to Fix

Turn off the power switch. Remove the ice tray from the refrigerator. Unplug the refrigerator. Check if the power cord is plugged properly. Plug the power cord back into the wall outlet. Reattach the ice tray to the refrigerator. How To Repair A Fridge Freezer Door Handle Answer: 1 Remove the door panel. 2 Disconnect the wires connected to the handle. 3 Pull the handle assembly away from the fridge/freezer. 4 Remove the screws holding the handle assembly in place. 5 Remove the handle assembly. 6 Connect the new handle to the old handle using the supplied wire connectors. 7 Reconnect the wires to the handle assembly. 8 Screw the handle assembly back into place. 9 Replace the door panel. 10 Reconnect the wires. 11 Test the handle operation. 12 Tighten the screws. 13 Reinstall the door panel. 14 Reconnect the wires and test again. 15 Tighten the screws again. 16 Replace the door panel and reinstall the door. 17 Test the handle operation again. 18 Repeat steps 1–16 until the handle works properly.

1. Dispenser Control Board

Dispenser Control Board DCB 2. DCB Cover 3. DCB Mounting Plate

2. Dispenser Switch

1. Disposer Control Board DCB 2. DCB cover

4. Dispenser Actuator

3. Auger Motor 4. Dispenser actuator

5. Dispenser Door Motor

1. Dispenser Actuators 2. Auger Motors 3. Dispenser Door Motor 4. Dispenser Actuater 5. Dispenser door motor

JennAir Refrigerator Water Dispenser Dripping – Solutions

1 Check the drain hose for kinks or obstructions. 2 Is the dispenser turned off?

1. Water Filter

Check the filter for blockages. If the filter is clogged, turn the unit off and remove the filter from the refrigerator. Clean the filter using warm water and dishwashing liquid. Rinse thoroughly and replace the filter. 2. Drain Hose Answer: Remove the drain hose from the back of the refrigerator. Turn the faucet on full force and let the water run until the dripping stops. Then check the drain hose for kinked areas or obstructions.

3. Water Tank Assembly

Remove the top panel of the refrigerator. Check the water tank assembly for leaks. If any leak is found, repair it immediately. 4. Refrigerator Door Seal Answer: Remove the door seals from the refrigerator. Replace if necessary.

4. Drip Tray

Check the drip tray for leaks. Repair if needed. 5. Ice Maker Answer: Remove the ice maker from the freezer compartment. Clean the ice mold with warm water and soap. Rinse well. Dry thoroughly. Reinstall.

JennAir Refrigerator Water Dispenser Slow — What to Do

Check the faucet filter. Replace if necessary. 6. Microwave Oven Answer: Remove the microwave oven from the cabinet. Unplug the unit. Disconnect the power cord. Turn off the switch. Remove the door panel. Inspect the interior of the microwave oven for any damage. Repair any damaged parts. Replace any broken parts. Install the new part. Plug the unit back into the wall outlet. Turn the unit on. Test the operation of the microwave oven.

2. Water Line

Check the faucet filter for debris. Clean the screen if needed. 3. Drain Pipes Answer: Check the drain pipes for leaks. If there is a leak, repair it.

3. Water Pressure

Turn off the main water supply valve. Open the shutoff valves on each fixture downstream from the main valve. Test the water pressure at each fixture. If the water pressure is low, check the water meter for obstruction. 4. Hot Water Heater Answer: Check the thermostat setting. Make sure the heating element is clean. Replace any worn parts.

4. Reverse Osmosis System

Check the filter cartridge for clogs. Clean the filters. Change the filter cartridges if necessary. 5. Sewage Disposal System Answer: Check the sewage disposal system for blockages. Remove debris from the trap. Check the overflow pipe for leaks.

5. Shutoff Valve

Check the shutoff valve for leaks. Replace any damaged parts. 6. Water Softener Answer: Check the water softener for leaks. Replace any broken components.

JennAir Refrigerator Water Dispenser Locked — What to Do

If the refrigerator water dispenser is locked, follow these steps to unlock it: 1. Turn off the power switch if necessary 2. Remove the refrigerator door panel

JennAir Refrigerator Water Dispenser Making Noise — How to Fix

1. Check the water level in the reservoir tank. It should be full. 2. If the problem persists, check the faucet for leaks.

1. Water Inlet Valve

Check the water level in the refrigerator water dispenser reservoir tank. It should always be full. If the water level is low, refill the tank. 2. Faucet Leakage Answer: If the problem persists, try checking the faucet for leakage. Turn off the cold water supply and remove the faucet from the sink. Remove the rubber washer and tighten the nut. Replace the faucet and turn on the cold water supply. If the leak still exists, replace the faucet.

2. Water Filter

If the problem continues, check the filter for blockages. Clean the filter using a brush and warm water. If the problem persists, replace the filter. 3. Drain Line Answer: Check the drain line for clogs. Use a plunger to clear any debris. If the problem persists call a plumber.

JennAir Refrigerator Water Dispenser Sticks — Solutions

Check the refrigerator door seals for leaks. If the leak is not located under the refrigerator, remove the back panel and inspect the area around the compressor. If the leak is still present, contact a professional service technician.

Why is my fridge dispenser not working?

To open the door of the refrigerator, press the button located near the handle. The door will open automatically. To lock the door, press the same button again.

How do you fix a broken water dispenser on a refrigerator?

If you notice that the water dispenser on your fridge isn’t working properly, you need to check if the faucet is leaking. This could happen because of a faulty connection between the faucet and the water supply line. To repair this problem, you need to remove the faucet from the wall and disconnect the water supply line. Then, you need to clean the area around where the faucet was connected to the wall. After cleaning the area, reconnect the faucet to the water supply line. Once the faucet is reattached, turn on the cold water tap and test the water dispenser again. If the water still doesn’t flow, you need to replace the faucet.

How do I unlock my Jenn Air refrigerator water dispenser?

Fridge dispensers are used to dispense cold drinks from the fridge. It is usually found in the door of the refrigerator. These refrigerators are equipped with a compressor and a condenser coil. The compressor works continuously to maintain the low temperature inside the refrigerator. The condenser coil cools down the air circulating around the coils. This cooled air is then circulated back into the refrigerator where it gets cooled again. This process continues until the desired temperature is achieved. The refrigeration system uses electricity to operate. If the power supply goes off, the compressor stops functioning. The compressor cannot function if the electrical current is interrupted. In such cases, the refrigerator dispenser does not work. To fix this problem, contact the service provider.

Daisy Kim
Latest posts by Daisy Kim (see all)

Leave a Comment