Last Updated on March 17, 2022
You bought a Jennair refrigerator and it stopped working.
What should you do?
Jennair is a brand name owned by Whirlpool Corporation.
The company has been manufacturing refrigerators since the 1950s.
In 2015, they introduced their new line of refrigerators called Jennair.
They claim that these refrigerators are built better than other brands.
Refrigerators are essential appliances in every home.
If you have a problem with your refrigerator, you should contact the manufacturer or service provider immediately.
Here are some things you should consider before contacting them
How to Fix a JennAir Refrigerator That is Not Cooling
Jennair refrigerator not cooling is a common problem. It can happen because of many reasons. First thing you need to check if the compressor is working properly. If it is not running, then you need to replace it. Check the power supply and see if it is getting enough voltage. Also check the fuse box and see if any fuses are blown. If everything seems fine, then you need to check the thermostat. Make sure it is set correctly. If it is still not working, then you need to call a professional technician.
1. Look for Any Power Issue
Check the power supply and see whether it is getting enough voltage or not. If it is not getting enough voltage, then you need to change the fuse. If the fuse is ok but still the problem persists, then you need to contact a professional technician. 2. Check the Thermostat Answer: Check the thermostat and make sure it is set correctly and it is not blocked. If it is not working, then you can try to reset it. Resetting the thermostat is easy. Just turn off the power switch and wait for 10 seconds. Then turn the power back on and wait for another 10 seconds. After that, turn the power off again and wait for 5 minutes. Turn the power back on and see if the thermostat is working now. If it is not, then you need to get a new one.
2. Check If the Door Seals are Damaged
If the door seals are damaged, then you need to replace them. It is very important to check the door seals because they are responsible for keeping the air inside the oven. If the door seals are damaged then the air inside the oven cannot circulate properly. This will result in the food being cooked unevenly. 3. Check the Oven Rack Answer: Check the oven rack and make sure it is clean. If it is dirty, then you need to wash it. Make sure that the racks are placed evenly and not touching each other.
3. Check the Temperature Settings
Check the temperature setting of the oven. Make sure that the temperature setting is correct. If the temperature setting is incorrect, then you need to adjust it accordingly. 4. Check the Oven Light Answer: Check if the light switch is working or not. If the light switch is not working, then you need to change it.
4. Inspect the Condenser Coils
Check the condensate drain tube. It should be clear and free from any clogs. 5. Clean the Filter Answer: Clean the filter by removing the filter cover and cleaning it using a brush.
5. Troubleshoot Part Failures
If the fan motor fails, check the wiring harness for continuity. If the fan motor does not turn on, check the fuse box for blown fuses. 6. Check the Thermostat Answer: Check the thermostat for proper operation. Make sure the thermistor is properly installed and connected to the circuit board.
This Is An Original Part!
Check the wiring harness for continuity and make sure the fan motor turns on and off when the switch is turned on and off. 7. Check the Fuse Box Answer: Check the fuse box for blown fuse.
JennAir Refrigerator Not Cooling or Freezing – Causes
If the refrigerator is not cooling or freezing, check the thermostat. It may be stuck open or closed. Also, check the power cord connection to the unit. Make sure the plug is fully inserted into the outlet. Jennair Refrigerator Not Cooled or Frozen – Repair 1. Remove the back panel from the Jenn Air refrigerator.
1. Dirty Condenser Coils
2. Clean the coils using compressed air. 3. Check the condenser fan motor.
2. Defective Condenser Fan Motor
1. Dirty condenser coils Clean the condenser coils using compressed air. 2. Defective condenser fan motor Check the condenser fan motor If the condenser fan motor is defective, the fan blades will not rotate smoothly. This will result in overheating of the condenser coils.
3. Faulty Evaporator Fan Motor
Defective evaporator fan motor Check the evaporator fan motor If the evaporator fan motor is defective, it will stop working. This will result in the cooling system malfunctioning.
Why is My JennAir Refrigerator Not Cooling Properly?
Jennair refrigerators are known for being reliable. However, if the refrigerator does not cool properly, it could mean that something is wrong with the compressor. Check the following items to see if any of them are causing the problem: 1. Make sure the door seals are clean and free from debris. 2. Check the refrigerator’s condenser coils for dust buildup. Clean them using a vacuum cleaner attachment.
1. Check the Condenser Coils
If the condenser coil is clogged, the air flow will be reduced, and the cooling system will not function efficiently. This will result in higher energy bills and lower efficiency.
2. Examine the Temperature Setting
Check the temperature setting. It should be set between 180°C 350°F and 220°C 425°F. 3. Clean the Filter Clean the filter periodically to ensure that it does not become blocked.
3. Check If the Defrost Heater is Frosted Over
If the defrost heater is frosted over, clean it using a soft cloth. 4. Check if the Defrosting Cycle Is Complete Answer: Defrosting cycles vary from model to model. For instance, some models take about 15 minutes while others take 30 minutes.
Check out these other articles on refrigerators not cooling for other brands…
Refrigerator not cooling – what’s wrong? How to fix refrigerator not cooling How to fix refrigerator door won’t open
Reasons Why a JennAir Refrigerator is Not Cooling But Freezer is Working?
Check out these other articles on Refrigerators not cooling for other manufacturers…
1. Evaporator Coils and Defrost Heater Failure
If the evaporator coils are clogged with ice crystals, the freezer will not cool properly. To clean the evaporator coils, remove the back panel from the freezer and turn off the power switch. Remove the door panel and disconnect the electrical cord. Disconnect the compressor motor from the wall outlet using the three pronged plug. Remove the screws holding the bottom plate of the freezer cabinet to the floor. Lift the bottom plate away from the floor. Pull the evaporator coil assembly out of the freezer compartment. Clean the evaporator coils with warm water and mild dishwashing soap. Rinse thoroughly until no soap residue remains. Dry the evaporator coils with a soft cloth. Replace the evaporator coil assembly into the freezer compartment. Reattach the bottom plate to the floor. Reconnect the electrical cord to the wall outlet. Turn the power switch on. Close the door panel. Check the operation of the freezer. If the problem persists, contact a service technician. 2. Refrigerator Door Won’t Open
2. Defective Evaporator Fan Motor
Defective evaporator fan motor may cause the refrigerator door won’t open. It’s recommended to check the evaporator fan motor first. If the evaporator fan motor is defective, replace it with new one. If the problem still exists, please call our customer service hotline at 800 998-9463 for further assistance. 3. Defective Compressor Motor Answer: Defective compressor motor may cause the refrigerator won’t start. It’s recommended to replace the compressor motor first. If the compressor motor is defective, replace the compressor motor with new one. If it still doesn’t work, please call our customer care hotline at 800 999-9463 for further help.
3. Damper Control Assembly Failure
Damper control assembly failure may cause the refrigerator won’t start. It’s recommended that you check the damper control assembly first. If the damper control assembly is defective, replace it. If it still doesn’t work, please call our Customer Care Hotline at 800 999-9462 for further assistance. 4. Damper Control Assembly Malfunction Answer: Damper control assembly malfunction may cause the refrigerator won t start. It’s recommended you check the damper first. If the dampered control assembly is defective, remove it and replace it with new one, if it still doesn’t work,please call our Customer Care Hot Line at 800 999-9461 for further assistance.
4. Faulty Temperature Control Board
Faulty temperature control board may cause the refrigerator won’t start. Please refer to the following article instruction how to repair the faulty temperature control board. 5. Faulty Compressor Motor Answer: Faulty compressor motor may cause the refrigerator won’ t start. Please refer to following article instruction how to fix the faulty compressor motor.
How can I make my refrigerator colder?
If you have a fridge that won’t cool down, check if the compressor is running properly. If it’s not, try restarting the compressor. If that doesn’t work, turn off the power switch and wait 10 minutes. Then turn the power back on and see if the problem persists. If it does, call a professional repair service.
What do you do if your refrigerator is not cold enough?
If your refrigerator is not cold, you can try these tips to get it back to normal: 1 Make sure the door is closed tightly. 2 Check the temperature setting on the thermostat. 3 Clean the coils and vents. 4 Try turning off the compressor and letting the fan run. 5 Check the air filter. 6 Turn off the power switch. 7 Check the freezer compartment. 8 Close the doors and windows. 9 Open the freezer door and check the ice maker. 10 Check the condenser unit. 11 Check the evaporator coil. 12 Check the drain pan. 13 Check the drain hose. 14 Check the drain pump. 15 Check the drain line. 16 Check the drain valves. 17 Check the drain pipe. 18 Check the drain plug. 19 Check the drain tube. 20 Check the drain gasket. 21 Check the drain cap. 22 Check the drain valve. 23 Check the drain pipe connections. 24 Check the
How do you reset a refrigerator that is not cooling?
Refrigerators are designed to maintain the coldest temperatures possible within the confines of the unit. This is accomplished by using a refrigerant called Freon. Refrigerants are gases that absorb heat from the surrounding air and transfer it into the interior of the fridge. As the gas expands, it cools down the air inside the fridge. Refrigeration units are generally filled with Freon, but if the unit loses power, the Freon escapes and the fridge becomes warmer. To prevent this from happening, the compressor needs to run continuously. In order to keep the compressor running, the refrigerator needs to be plugged into a source of electricity.
- 3 Ingredient Lemon Pie - March 27, 2022
- How To Store And Serve Ice Cream Cake? - March 27, 2022
- How To Cook Frozen Lasagna Faster? - March 27, 2022