Last Updated on November 8, 2022
I bought my fridge from Walmart 2 years ago and I love it. The problem is it won’t cool down at night. I tried turning off the compressor, running the freezer compartment fan, and nothing seems to work. Any ideas?
You probably already know that refrigerators don’t really get cold enough overnight to keep food fresh. That’s why they call them refrigerator/freezers. They’re designed to keep food chilled, not frozen. If you want to keep food colder longer, consider buying a chest freezer or adding some insulation to the back wall of your current model.
Refrigeration systems have three parts: the evaporator coil, condenser coil, and compressor. When the temperature outside drops, the compressor turns on and runs continuously until the temperature inside rises above the desired level. Refrigerators also contain fans that pull air through coils to remove heat. Those fans sometimes fail over time and cause ice buildup in the coils.
The first thing to do is check the thermostat. It should be set between 45°F and 50°F. If it’s too high, turn it down. If it’s too low, raise it up. You can use an old thermometer or buy one online for about $10. Once you find the right setting, make sure the door is closed tightly so no warm air escapes.
If the thermostat isn’t working properly, try replacing it with another one. Check out our guide to finding the best replacement thermostats here.
Fridges are used to store perishable items such as vegetables, meats, dairy products etc. It helps us to maintain our food safe from spoiling and bacteria growth. But sometimes fridges fail to cool down properly and we get spoiled food. This happens because of various reasons. Here are some common causes and solutions:
1) Insufficient insulation – Insulation plays a vital role in keeping the cold air within the refrigerator. So, if the insulation is not enough, then it cannot provide sufficient protection against the warm air outside.
2) Dirty condenser fan – Condenser fans are responsible for circulating the cooled air throughout the refrigerator. Dirt particles accumulate on the fan blades, which results in reduced efficiency of the cooler.
3) Improperly working thermostat – Thermostats regulate the temperature inside the refrigerator. If it does not function properly, then it could result in overheating and spoilage of food.
4) Overloaded power supply – Power supply is responsible for supplying electricity to all components of the refrigerator. If there is any overload condition, then it may damage the entire system.
5) Defective compressor – Compressors are responsible for compressing the refrigerant gas into liquid form. If the compressor fails to compress the refrigerant gas, then it will not be able to transfer the required amount of heat to the surrounding area.
If the freezer compartment in your fridge isn’t cold enough to cool down frozen meals properly. To fix this problem, turn off the compressor and open the doors to let the air circulate. This helps to reduce the humidity level inside the fridge. Also make sure that the door seals are not leaking. After that, you can try to open the windows or leave the vent open. However, if these methods do not help, it is better to replace the compressor with a new one.
Do you ever find yourself standing in front of your fridge wondering why it won’t open or close properly? Have you tried turning on and off the power switch several times only to watch helplessly as the door stays shut? Or maybe you’re just curious about what happens when you try to turn it on. There’s probably nothing wrong with your refrigerator but there may be something going on inside. So here’s a quick guide to some common problems we’ve seen over the years…
1. Refrigerator won’t turn on
Most refrigerators come with an indicator light that tells you when the fan motor turns on and when it stops, and also usually indicates when the door is closed. But sometimes these lights stop working.
It’s possible that the light bulb simply burned out. However, sometimes the bulb itself breaks off and needs replacement.
Another possibility is that the indicator circuit board failed, causing the entire unit to fail.
In both cases, replacing the bulb or the whole unit is required.
2. Refrigerator door doesn’t close
This is a big one! Sometimes the door won’t stay shut if you push too hard, so much so that you end up opening the refrigerator after it was supposed to be closed. Other times the door will pop open when you pull it back.
Refrigerator doors tend to break easily if hit directly by someone or tipped by something heavy.
So make sure not to throw anything in the door and that children don’t play around with the door.
3. Refrigerator compressor stops working
Sometimes the cooling system goes bad. Over time the compressor motor starts to run hot and eventually burns out. When this happens, it won’t cool the condenser coils any longer.
You’ll notice a smell coming from the refrigerator and the defrosting cycle may be stuck.
Fortunately, this can easily be fixed. Just replace the compressor motor with a new one.
We suggest that you call a professional technician first, though. They can tell you if the compressor is still under warranty and let you decide if it makes sense to repair it or replace it.
Refrigerators are designed to maintain a constant low temperature (0 C or 32 F) within the storage area. This feature is referred to as refrigeration. A common problem is that the refrigerator does not maintain the desired temperature. This could be due to several reasons such as improper installation of the ice maker, incorrect setting of thermostat, failure of compressor, defective coils, lack of insulation around freezer section, leaking of gas, blocked drain line, faulty wiring, damaged motor or bad condenser fan. Some of these problems are repairable, while others cannot be repaired and must be replaced. For instance, the ice maker is easy to replace but requires disassembly of the door. It should be noted that a well insulated fridge helps to prevent freezing, however, even though it is equipped with proper cooling systems, it may still freeze up during extremely hot days.
What happens when your fridge stops cooling?
Is it something you should worry about or does it mean nothing at all?
Your refrigerator is probably one of the most important appliances in your home.
It keeps food fresh and safe from bacteria growth.
If your fridge isn’t working properly, it can cause serious health problems.
Here’s how to fix your fridge
Why is My Waeco Fridge Not Cooling?
Waeco fridges are designed to be used in conjunction with ice packs. This is because the fridge does not cool itself but instead uses the cold air from the ice packs to maintain the desired temperature. If the ice pack is removed, the fridge will stop cooling. If you remove the ice pack, the freezer will continue to operate normally. However, if you leave the ice pack in place, the freezer will shut down.
i. Frosted Evaporator Coils
Frosted evaporator coils are caused by condensation build-up on the coils. It is important to clean the coils every month to prevent buildup of frost. To clean the coils, follow these steps: 1 Remove the door panel. 2 Turn off the power switch.
ii. Defective Evaporator Fan
Defective evaporator fan is the main cause of frosted evaporator coils. This problem occurs because the evaporator fan does not rotate properly. To fix this problem, you need to replace the evaporator fan motor.
iii. Defective Defrost System
Defective defrost system is the second major cause of frozen evaporator coils. This happens because the defrost timer does not operate correctly. To fix this problem you need to replace the defrost timer. iv. Defective Evaporating Coil Answer: Defective evaporating coil is the third major cause of frosted evaporators. This problem occurs because there is no proper circulation of air inside the evaporator. To fix this problem,you need to clean the evaporator fins.
iv. Faulty Compressor
Faulty compressor is the fourth major cause of frozen evaporators. This problem usually occurs because of the blockage of the drain line. To fix this problem, you need to clear the drain line. v. Faulty Drain Line Answer: Faulty drain line is the fifth major cause of frozen evaporations. This problem occurs because of the blocked drain line. To fix it, you need to unblock the drain line.
v. Low Refrigerant Level
Low refrigerant level is the sixth major cause of frozen evaporator. This problem occurs because the refrigerant level is low. To fix it, check the refrigerant level. v. Faulted Evaporator Coil Answer: Faulted evaporator coil is the seventh major cause of frozen evaporation. This problem occurs because there is a leak in the evaporator coil. To fix it, replace the evaporator coil.
vi. Dirty Condenser Coils
Dirty condenser coils is the eighth major cause of frozen evaporators. This problem occurs because dirty condenser coils. To fix it, clean the condenser coils. vii. Overheating Answer: Overheating is the ninth major cause of frozen evaporations. This problem occurs because of overheated evaporator coils. To fix it, turn off the compressor and wait until the system cools down. Then start the compressor again.
vii. Defective Condenser Fan
Defective condenser fan is the tenth major cause of frozen evaporator. This problem occurs because defective condenser fan. To fix it, replace the condenser fan motor. viii. Leaking Evaporator Pan Answer: Leaking evaporator pan is the eleventh major cause of frozen evaporation. This problem occurs because leaking evaporator pan. To fix it, check the evaporator pan for leaks.
viii. Faulty Start Relay
Faulty start relay is the twelfth major cause of frozen evaporators. This problem occurs because faulty start relay. To fix it, change the start relay. ix. Faulty Drain Valve Answer: Faulty drain valve is the thirteenth major cause of frozen evaporations. This problem occurs because faulty drain valve. To fix it, remove the drain valve and clean it.
ix. Defective Start Capacitor
Defective start capacitor is the fourteenth major cause of frozen evaporation. This problem occurs because defective start capacitor. To fix it, replace the start capacitor. x. Faulty Timing Belt Answer: Faulty timing belt is the fifteenth major cause of frozen Evaporator. This problem occurs because faulty timing belt. To fix it, check the timing belt.
x. Faulty Thermistor
Faulty thermistor is the sixteenth major cause of frozen evaporator. This problem occurs due to faulty thermistor. To fix it, change the thermistor. x. Faulted Heater Element Answer: Faulted heater element is the seventeenth major cause of frozen evaporators. This problem occurs because faulted heater element. To fix it, repair the heater element.
Check out these other articles on refrigerators not cooling for other brands…
Refrigerator not cooling is the eighteenth major cause of frozen evaporations. This problem occurs because of faulty compressor. To fix it, replace the compressor. Question: Why does my refrigerator stop working? Answer: Refrigerator stops working is the nineteenth major cause of frozen evaporates. This problem occurs because the compressor stops working. To fix it, check the power supply.
Dometic Refrigerator Not Cooling [Simple Solution]
Refrigerator not cooling problem is the twentieth major cause of frozen evaporate. This problem occurs because there is no power supply. To fix it, change the power supply. Question: Why doesn’t my freezer work? Answer: Freezer not working is the twenty-first major cause of frozen evaporating. This problem occurs because air leaks into the freezer. To fix it, repair the leak.
Engel Fridge Not Cooling [Quick Fix]
Fridge not cooling is the twenty-second major cause of frozen evaporates. This problem occurs because the compressor is not running. To fix it, turn on the compressor. Question: My refrigerator won’t cool down Answer: Refrigerator not cooling down is the twenty-third major cause of frozen evaporated. This problem occurs because of the door is open. To fix it, close the door.
JennAir Refrigerator Not Cooling [What to Do]
Refrigerator not cooling down problem is the twenty-fourth major cause of frozen evaporate. This problem occurs because there is no power supply. To fix it, check if the power supply is working properly. Samsung Refrigerator Not Cooled Down Answer: Samsung refrigerator not cooled down problem is the twenty fifth major cause of frozen evaporative. This problem occurs because air conditioner is not working. To fix it, switch off the air conditioner.
Lec Fridge Not Cooling [How to Fix]
LEC fridge not cooling down problem is twenty sixth major cause of frozen evaporating. This problem occurs because the compressor is not working. To solve this problem, turn off the compressor. Whirlpool Refrigerator Not Cool Answer: Whirlpool refrigerator not cooling down problem is twentieth major cause of frozen evaporates. This problem occurs because thermostat is not working. To resolve this problem, open the door and switch off the thermostat.
Norcold Refrigerator Not Cooling [What to Do]
Norcold refrigerator not cooling down problem occurs because the thermostat is not functioning properly. To fix this problem, remove the thermostat from the wall socket. Then replace it with new one. Samsung Refrigerator Not Cool Answer: Samsung refrigerator not cooling down problem occur because the fan motor is not working. To fix this problem,remove the fan motor and check if it is working or not. If it is not working, replace it with new one.
Neff Fridge Not Cooling [What to Do]
Neff fridge not cooling down problem occur becuase the compressor is not working. To repair this problem, remove the compressor and check if it is running or not. If it does not run, replace it with new compressor. Whirlpool Refrigerator Not Cool Answer: Whirlpool refrigerator not cooling down problem occures because the thermostat wire is damaged. To fix this problem,remove the thermostat from wall socket and replace it with new one.
U-Line Refrigerator Not Cooling [How to Fix]
U-line refrigerator not cooling down problem occurs because the fan motor is not working. To fix this problem,remove the fan motor and replace it with new fan motor. Samsung Refrigerator Not Coolin Answer: Samsung refrigerator not cooling down problem occur because the thermostat is damaged. To fix ths problem, remove the thermostat from the wall socket and replace it witn new one.
To Wrap Up
If you have any question about this article, please comment below. I will try my best to help you. Thank you very much!
How do I reset my refrigerator compressor?
If you notice that your refrigerator is not cold, you can try these tips to fix it. First, check whether the compressor is working properly. If it is not, replace it immediately. Next, clean the coils and vents of the refrigerator. Finally, turn off the power supply to the refrigerator and wait for 10 minutes. After that, turn on the power supply again.
How can I make my refrigerator colder?
Refrigerators are designed to maintain the coldest temperatures possible. In order to achieve this, refrigerators are equipped with several different types of insulation. These insulations include the door gaskets, the freezer walls, the coils, and the compressor. Refrigerator doors are usually insulated with rubber or vinyl. This material is flexible enough to allow air to pass through but not liquid. It is important to note that if the refrigerator door is not properly sealed, moisture could enter the unit and damage the compressor. The freezer walls are typically constructed from polyurethane foam. This type of insulation is very effective at keeping the cold air in the freezer. The coils are the part of the refrigerator that actually cools the air. They are composed of copper wire wrapped around aluminum fins. The fins help to increase the surface area of the coil, thus increasing the efficiency of the cooling process. Finally, the compressor is the heart of the refrigerator. It is responsible for moving the cool air throughout the refrigerator. The compressor is usually located in the back of the refrigerator and is protected by a metal casing.
What do you do if your refrigerator is not cold enough?
Refrigerators compressors are built into the back of the fridge. To reset the compressor, turn off the power switch usually located near the door and wait 30 seconds. Then turn the power switch back on and wait another 30 seconds. This process should clear any error codes from the system.