Whirlpool Refrigerator Error [Solved]

Have you ever had trouble using your refrigerator or washing machine?
If yes, then you might have experienced a Whirlpool error code.
This problem has been around since the early 2000s, but now it seems to be back with a vengeance.
What exactly is a Whirlpool error?
The Whirlpool company was founded in 1919 and became famous for its high quality appliances.
In the mid 1990s, they started developing their own line of refrigerators and washing machines.
They also began selling them under the name Whirlpool.
The Whirlpool error codes are basically a series of numbers that appear on the display screen of your appliance.
These codes are usually accompanied by a message that tells you what went wrong

Whirlpool Refrigerator Error Codes – How to Fix

1 Turn off the power supply to the refrigerator. 2 Remove the back panel from the bottom of the refrigerator.

PO

1. Check if the power switch is turned on. 2. Check if the fuse is blown.

E0

PO 1. Check if there is any short circuit. 2. Check the fuses. E0

E2

A:

E3

E4

E6

A:

E7 and E8

E6 and E7 are two different types of electric fans. E6 is used for cooling purpose while E7 is used for heating purpose. E6 is usually installed in air conditioners and refrigerators. It is used to cool down the surrounding environment. E7 is used to heat up the surrounding environment. It is installed in ovens and stoves. It is used to heat up our surroundings.

EE

A:

6 on the Refrigerator Display

Refrigerators are designed to keep food cold. A refrigerator uses a compressor to cool air inside the fridge. This process requires electricity. To save energy, many refrigerators now use LED lighting instead of traditional incandescent bulbs. 7 on the Dishwasher Display Answer: Dishwashers are used to clean dishes after meals. Most dishwashers use detergent and hot water to wash dishes. These machines usually have a timer that tells you how long the washing cycle takes.

6 (Flashing) on the Refrigerator Display

A flashing light indicates that the refrigerator needs service. It could be any of the following: 1. The evaporator coil needs cleaning. 2. The compressor needs cleaning.

d on the Refrigerator Display

C on the freezer display indicates that the refrigerator is set to cool mode. This setting allows the refrigerator to maintain the interior temperature between 0°F and 32°F. It is recommended that you leave the door open during operation to allow air circulation.

18F on the Freezer Display

This indicates that the freezer is set to freezing mode. This setting allows for the freezer to maintain the interior temperature from 32°F to 0°F. It is important to note that if the freezer door is closed, the temperature inside the freezer will drop significantly.

CF on the Freezer Display

This indicates that the freezer was set to cooling mode. This setting allows the freezer to maintain the internal temperature from 0°F to -18°F. It is essential to note that if the door is closed, the internal temperature of the freezer will rise considerably.

01

CF on the Freezer Display indicates that the freezer was not set to cooling mode. 02 Answer: CF off the Freezer Display indicates the freezer was set to freezing mode.

02

If CF is off, then the freezer is set to freezing mode. If CF is on, then the freezer is not set to freezing mode. To change the setting from freezing to cooling mode, press the button until the display reads “Cooling Mode”.

03 and 04

04 If CF is off and the freezer is set to Freezing Mode, then the freezer is in the OFF state. If CF is on and the freezer is set in the FREEZING MODE, then the freezer is ON. To turn the freezer OFF, press the button until it displays the word “OFF”. Press the button again to turn the freezer back ON.

05

03 To change the setting from AUTO to MANUAL mode, press the button until the display explains the word “MANUAL”. Then press the button again to return to the AUTO mode. 04 Press the button until the display reads “AUTO”. Press the buttons again to return to the MANUAL mode. 05 Press the button until it explains the word “ON”. Press the switch again to return to the OFF position.

06

07 Question: 08

07

08 09

08

10 11

-7

12 13

Check out these other related articles…

14 15

Quick Note:

16 17

How do I fix E1 error in my Whirlpool refrigerator?

E1 error is a common problem in Whirlpool refrigerators. It occurs when the compressor stops working properly. This could happen if the compressor motor overheats. To prevent this from happening again, you should check the following items: 1 Make sure the compressor fan is running. 2 Check the filter for debris. 3 Clean the coils. 4 Replace the evaporator coil. 5 Change the air filters. 6 Check the drain hose for leaks. 7 Check the condenser fan blades for damage. 8 Check the thermostat. 9 Check the power supply. 10 Check the wiring harness. 11 Check the door seals. 12 Check the door gaskets. 13 Check the door hinges. 14 Check the door latch. 15 Check the door handle. 16 Check the door switch. 17 Check the door lock mechanism. 18 Check the ice maker. 19 Check the ice bin. 20 Check the freezer light bulb. 21 Check the freezer door. 22 Check the freezer shelves.

How do I fix error code E1 F3?

E1 F3 error code indicates that the power supply voltage is not sufficient to operate the appliance. This usually occurs if the power cord is damaged or loose. In such cases, you need to replace the power cord.

How do I fix E1 error on my Whirlpool refrigerator?

E1 error occurs when the compressor stops working. It could be caused by many reasons such as bad wiring, faulty motor, bad capacitor, bad fan belt, bad compressor, bad relay, bad contactor, bad thermostat, bad door switch, bad circuit breaker, bad fuse, bad evaporator coil, bad condenser coil, bad blower motor, bad fan motor, bad compressor motor, bad compressor relay, bad compressor solenoid, bad compressor starter, bad compressor stator, bad compressor transformer, bad compressor rectifier diode, bad compressor regulator, bad compressor capacitor, bad compressor resistor, bad compressor fuse, bad compressor fuse holder, bad compressor fuse, broken wire, shorted wire, open wire, damaged wire, bad power supply, bad power cord, bad light bulb, bad light fixture, bad light socket, bad light bulb, blown fuse, blown fuses, blown fuse holder, blown fuse, blown fuse box, blown fuse, blown lamp, blown light bulb, blown light fixture, blown light socket, blown power supply, blown power cord, blown power plug, blown power receptacle, blown power strip, blown power supply, burned out fuse, burned out fuse box, burned out fuse, burnt out fuse holder, burnt out fuse, burnt out lamp, burnt out light bulb, burnt out light fixture, burnt out light socket, burnt out power supply, burnt out power cord, burnt out power plug, burnt out power receptacle, burnt out power strip, burnt out power supply.

Daisy Kim
Latest posts by Daisy Kim (see all)

Leave a Comment