GE Refrigerator and Freezer Not Getting Cold [How to Fix]?

Last Updated on March 16, 2022

You bought a brand new refrigerator or freezer recently, but now it isn’t cooling properly.
What should you do?
If you’ve ever purchased a new appliance, you probably noticed the manufacturer’s warranty sticker on the back.
This is where they’ll tell you exactly what their warranty covers.
The sticker usually has a date range, such as three years from purchase, and details about the manufacturer.
When purchasing appliances, it’s important to read the warranty information carefully before signing anything.
Some manufacturers offer extended warranties, which cover repairs after the expiration of the original warranty period

GE Refrigerator Not Getting Cold – What to Do

If you are having issues with your refrigerator not getting cold, here are a few tips to help you fix it. 1. Check if the thermostat is set correctly. Make sure that the thermostat is properly installed and the temperature setting is correct. 2. Check if the door seals are working properly. If the door seals are not working properly, you may have to replace them.

1. Set the Temperature

To set the temperature, turn off the power switch. Then press the “Temp” button located on the front panel of the refrigerator. Pressing the Temp button will display the current temperature. To change the temperature, simply press the Temp button again until you reach the desired temperature. 2. Reset the Thermostat Answer: Turn off the power switch. Remove the faceplate from the back of the refrigerator. Disconnect the wires connected to the thermostat. Turn the power switch back on. Reconnect the wires to the thermostat and reattach the faceplate.

this article

You can buy a new thermometer for about $10.00. It is easy to install and works well. I recommend using a digital thermometer because it is easier to read and gives you accurate readings.

2. Clean the Condenser Coils

3. Check the Thermostat 4. Make sure the thermostat is set to the correct setting.

3. Inspect the Door Gasket

1. Remove the door gasket from the front panel. 2. Turn off the power switch.

4. Replace the Thermistor

3. Check the thermistor for cracks or damage. 4. Clean the thermistor with warm water and soap.

5. Rearrange the Content

1. Remove the cover from the top of the unit. 2. Remove the thermistor from the bottom of the unit.

6. Check the Evaporator Coils

1. Remove the screws holding the cover on the top of the unit using a screwdriver. 2. Remove two screws from the back side of the unit.

7. Change the Evaporator Fan Motor

1. Remove the bottom plate of the unit using a flathead screwdriver. 2.Remove the four screws holding the front panel of the unit.

8. Check the Ambient Temperature

1. Open the door of the appliance and remove the two screws located near the top left corner of the door. 2. Lift off the door and disconnect the power cord from the back of the unit.

9. Be Sure Lights Go Off

10. Remove the bottom panel of the oven. 11. Disconnect the wires connected to the heating element.

10. Ensure Air Clearance

9. Be sure lights go off 10. Remove the base plate of the oven. 12. Disconnect the wires attached to the heating element.

If the Refrigerator Is New…

1. Check if the door seals properly. 2. Make sure the refrigerator is level.

GE Refrigerator Making Ice – Issues [Solved]

If the refrigerator is new, check if the door seals properly and if the refrigerator is level. If the refrigerator is not level, the ice maker will not function correctly. To correct the problem, place a heavy object such as a book on top of the refrigerator until the refrigerator is level. Then remove the weight from the refrigerator.

Water Not Coming Out of GE Refrigerator [How to Fix]

To fix the issue, turn off the power switch and unplug the appliance. Remove the bottom panel of the refrigerator and locate the drain tube. Turn the faucet on and let the water run into the drain tube. This will help clear any blockages. GE Refrigerator Water Leakage Answer: Turn off the power switch and disconnect the power cord. Unplug the refrigerator and open the door. Check the water line connections and tighten them if needed. Replace the cap on the water line.

GE Refrigerator Ice Maker Water Overflow [How to Fix]

Unplug the refrigerator and remove the ice maker from the freezer compartment. Open the back panel and check the wiring harnesses. Disconnect the wires and reconnect them in reverse order. Tighten the screws and replace the back panel. GE Refrigerators Water Leaks – Repair Answer: Disconnect the power supply and remove the back panel. Look for leaks under the evaporator coil. Clean the area around the leak using a damp cloth and mineral spirits. Reinstall the back panel.

GE Ice Maker Does Not Fill with Water [How to Fix]

Check the filter screen. Make sure the drain tube is clear. Check the ice bin for any obstructions. Remove the ice bin and clean the bottom of the ice bin. Replace the ice bin. GE Refrigerator Ice Maker Does Not Produce Ice – Repair Answer: Unplug the refrigerator and remove all the parts. Remove the ice maker from the refrigerator. Check the wiring harnesses. If necessary, disconnect the wires and reconnect them backwards. Tighten the screws. Replace the back panel.

Water Under GE Refrigerator [How to Fix]

Unplug the refrigerator and remove the door. Remove the water line. Clean the line with soap and warm water. Reinstall the water line. Plug the refrigerator into power. Turn the refrigerator on. GE Freezer Ice Maker Does Not Produces Ice Answer: Unplug freezer and remove the door. Disconnect the wiring harnesses. Remove the ice maker assembly. Clean the ice maker motor. Replace the ice maker assembly. Reconnect the wiring harnesses. Plug the freezer into power. Turn the freezer on.

GE Refrigerator Does Not Stop Running [How to Fix]

Unplug the refrigerator and disconnect the power cord from the wall outlet. Remove the back panel screws. Lift off the back panel. Remove the fan shroud. Remove the fan blade. Clean the fan blades. Replace the fan blade. Replace the back panel. Connect the power cord to the wall outlet. Plug the refrigerator into the wall outlet. Turn the refrigerator on and check if the compressor is running.

Water in Bottom of GE Refrigerator [Quick Fix]

If the water level is low, remove the bottom shelf. Check the drain pan under the refrigerator. If the water is not draining properly, clean the drain pan. Fill the drain pan with warm water. Close the door. Wait until the water drains completely. Drain the water. Reinstall the bottom shelf. GE Refrigerator Water Leak Answer: Unplug the refrigerator and disconnect power cord from the wall. Remove the back panel. Remove fan shroud. Remove the front panel. Remove the fan blade if available. Clean the fan blades. Install the fan blade. Replace fan shroud. Replace the front panel. Reconnect the power cord to the power source. Plug the refrigerator into power source. Turn the refrigerator on. Check if the compressor is running normally.

GE Freezer Not Getting Cold – Solutions

Unplug the freezer and disconnect power cord from wall outlet. Open the freezer door. Check the ice maker tray. Is the ice making properly? If yes, replace the ice maker tray. If no, check the ice maker tray. Make sure the ice maker tray is installed correctly. Replace the ice maker tray. Connect the power cord to the wall outlet. Plug the freezer into the wall outlet. Turn the freezer on. Check if the freezer is getting cold. GE Freezer Door Won’t Stay Closed – Solution Answer: Unplug freezer and disconnect power cord. Open the freezer door and check if the door is closing properly. If yes, replace the door gasket. If no, check if the door gasket is installed properly. Replace the door gasket. Reconnect the power cable to the wall outlet. Turn on the freezer. Check if the freezer gets cold.

1. Check the Evaporator Fan Motor

Check the evaporator fan motor. If the motor is not working, the fan will not run. Remove the front panel of the freezer. Disconnect the wires connected to the evaporator fan motor see picture. Clean the fan motor contacts with rubbing alcohol. Reattach the wires to the fan motor. Install the front panel. Turn the freezer back on. Check if the fan runs. 2. Check the Ice Maker Tray Answer: Check the ice maker tray for any debris. Clean the ice maker tray using warm water and mild soap. Dry the ice maker tray thoroughly. Reinstall the ice maker tray.

2. Check the Condenser Coils

Check the condenser coils for any debris. Clean them using warm water and mild dish detergent. Dry the condenser coils thoroughly. Reinstall the condenser coils. 3. Check the Door Seal Answer: Check the door seal for any debris. Clean it using warm water and mild detergent. Dry the door seal thoroughly. Reinstall the door seal.

3. Check the Start Relay

Check the start relay for any debris. Clean the relay using warm water and mild soap. Dry the relay thoroughly. Reinstall the relay. 4. Check the Drain Valve Answer: Check the drain valve for any debris. Cleaning the drain valve using warm water and mild liquid detergent. Dry the drain valve thoroughly. Reinstall the drain valve.

4. Check the Condenser Fan Motor

Check the condenser fan motor for any debris. Clean using warm water and mild detergent. Dry the condenser fan motor thoroughly. Reinstall the condenser fan motor. 5. Check the Thermostat Answer: Check the thermostat for any debris. Clean cleaning the thermostat using warm water and mild dishwashing liquid. Dry the thermostat thoroughly. Reinstall the thermostat.

5. Check the Evaporator Coils

Check the evaporator coils for any debris. Cleaning the evaporator coils using warm water and mild soap. Dry the evaporator coils thoroughly. Reinstall the evaporator coils. 6. Check the Drain Pump Answer: Check the drain pump for any debris. Clean the drain pump using warm water and mild cleaner. Dry the drain pump thoroughly. Reinstall the drain pump.

6. Check the Temperature Control Thermostat

Check the temperature control thermostat for any debris. Clean  the temperature control thermostats using warm water and mild detergent. Dry the temperature control thermostatic thoroughly. Reinstall the temperature control thermostate. 7. Check the Water Level Answer: Check the water level for any debris. Clean water level using warm water and mild cleaning solution. Dry the water level thoroughly. Reinstall the water level.

GE Fridge Top Shelf Not Cold – Quick Fix

Check the refrigerator door seals. Remove the refrigerator door seals and clean the rubber gaskets. Replace the refrigerator door seals. 8. Check the Refrigerator Door Seals Answer: Check the refrigerator door seals for any debris. Clean the refrigerator door seals using warm water and mild soap. Dry the refrigerator door seals thoroughly. Replace the refrigerator door seal.

Latest posts by Daisy (see all)

Leave a Comment