Last Updated on March 16, 2022
You’ve had your Hotpoint fridge/freezer for years now, and it’s still working fine.
But suddenly, it won’t start freezing food anymore.
What should you do?
If you’re having trouble keeping your freezer cold, it might be time to replace your old appliance.
Fridges and freezers tend to wear out over time, especially after five or six years.
And even though they last longer than other appliances, they don’t always perform well.
Fridge and freezer repair can cost anywhere from $50-$200 depending on the size of the unit.
If you want to save some cash, consider buying a new model instead
Hotpoint Freezer Not Freezing at the Top – What to Do
If you have a hotpoint freezer not freezing at the top, you need to check if the door is open or closed properly. If it is closed, try opening it again. If it still doesn’t work, you can call customer service hotline at 1-800-922-4357.
1. Check the Air Vents
Check the air vents to see if any of them are blocked. If you notice any blockage, clean it using a vacuum cleaner. 2. Clean the Door Seal Answer: Remove the door panel from the freezer. Then remove the gasket from the door frame. Make sure the gasket is placed correctly. Replace the door panel and reattach the gasket.
2. Check the Contents
Remove the contents from the freezer. Check the ice cube tray for cracks or holes. Also check the ice trays for leaks. 3. Check the Ice Maker Answer: Remove the ice maker from the freezer. Check for leaks around the ice maker.
3. Check the Door Seal
Check the door seal for any damage. 4. Clean the Ice Tray Answer: Remove the tray from the ice maker. Wash the tray under warm running water. Dry the tray thoroughly.
4. Check the Air Filter
Remove the air filter from the freezer unit. Clean the air filter using a damp cloth. Replace the air filter. 5. Check the Thermostat Answer: Turn off the power switch. Open the door. Turn the thermostat knob to OFF position. Close the door. Turn the power switch back ON. Wait for 10 minutes. If the temperature does not reach 0°C within 10 minutes, turn the thermostat knob back to ON position.
5. Check the Sealed System
Open the door. Remove the lid. Check if the system is sealed properly. If it is not sealed properly, replace the lid. 6. Check the Drain Valve Answer: Check the drain valve. It should be closed. If it is open, shut it.
Hotpoint Freezer Not Freezing – How to Fix
If the freezer is not freezing, check the power supply. Make sure the power cord is plugged into the wall socket. Also check the fuse box. If the fuse is blown, replace it. How to Repair a Microwave Oven Answer: Turn off the power switch. Open the oven door. Turn on the light. Look for any signs of damage. Replace the filter if necessary. Clean the interior walls and bottom of the oven. Use a dry cloth to clean the exterior surface. Wipe away any spills or stains.
1. Faulty Temperature Control Thermostat
Check the thermostat. It could be damaged. Check the wiring connections. If the problem persists, contact the manufacturer. 2. Faulty Power Supply Answer: Check whether the power supply is working properly. If the power supply is faulty, turn off the power switch. Remove the plug from the outlet. Disconnect the power cord. Wait until the power supply stops functioning. Then reconnect the power cord.
2. Bad Start Relay
If the start relay is not working, check the fuse box. Replace the fuse if necessary. 3. Faulty Water Valve Answer: Check the water level. If the water level is low, fill the tank with hot tap water. Let the water run for about 15 minutes. If the problem still exists, replace the water valve.
3. Defective Evaporator Fan Motor
Remove the evaporator fan motor from the unit. Clean the fan blades and reassemble the motor. Check the wiring connections. Make sure the wires are connected properly. 4. Defective Thermostat Answer: Replace the thermostat.
4. Frosted Evaporator Coils
Clean the coils. Replace the frosted coils if necessary. 5. Defective Evaporating Pan Answer: Remove the pan. Clean the pan. Reinstall the pan.
5. Dirty Condenser Coils
Remove the condenser coil from the unit. Clean the condenser coil. Replace the condenser coil. 6. Defective Fan Motor Answer: Disconnect the power supply. Unscrew the fan motor. Clean the fan motor. Screw the fan motor back into place. Reconnect the power supply.
6. Faulty Condenser Fan Motor
Disconnect the power supply. Remove the condenser fan motor. Clean the condenser fan motor and replace the condenser fan motor 7. Faulty Thermostat Answer: Disconnect power supply. Turn off the power switch. Check the thermostat. If the thermostat is defective, replace the thermostat. Connect the power supply. Turn on the power switch.
1. Faulty Power Supply 2. Faulty Thermostatic Switch 3. Faulty Thermostats
1. Wrong Freezer Temperature
If you see the freezer door open and closed repeatedly, it could mean that the thermostat is faulty. To check if the thermostat is working properly, turn off the power supply to the freezer and wait about 10 minutes. Then, turn the power back on and observe whether the freezer door opens and closes normally. If not, replace the thermostat. 2. Faulty Door Sensor To fix this problem, remove the screws from the top panel of the freezer door and lift the panel. Look for any loose wires or connectors. If you find something wrong, replace the sensor.
2. Weak Door Seal
Check the door seals for cracks or gaps. Also, check the hinges for damage. If everything looks good, try cleaning the door seals with rubbing alcohol. 3. Frozen Food If you notice that the frozen food is thawing but the ice remains intact, it could mean that there is a leak somewhere in the freezer. Check the bottom of the freezer for leaks. If you find anything, repair the leak immediately.
3. Improper Air Circulation
Make sure that the fan is running properly. If the fan does not run well, it will affect the circulation of air inside the refrigerator. This will result in condensation on the inner walls of the refrigerator. To prevent this from happening, turn off the compressor and let the fan run for about 10 minutes. Then turn the compressor back on. 4. Dirty Filters Clean the filters every month. It helps to clean the filter periodically because dirty filters can clog the system.
Hotpoint Refrigerator Not Cooling or Freezing – Solution
1. Check if the power supply is working properly. 2. Make sure that the thermostat is set correctly.
1. Condenser Fan Motor
1. Turn off the refrigerator and unplug it from the wall outlet. 2. Remove the back panel of the refrigerator.
3. Evaporator Fan Motor
1. Condenser coils: A condenser coil is used to cool down the air coming from the evaporator fan motor. It consists of copper tubes connected together with aluminum fins. These fins help in cooling the air passing through the condenser coils. 2. Evaporator fan motor: This is the part where the refrigerant gas passes through the evaporator fan motor and gets cooled down. The evaporator fan motor is attached to the compressor.
A thermistor is a resistor that measures the temperature of a given object. In our case we are measuring the temperature of the refrigerant gas flowing through the evaporator fan motors. 5. Compressor: The compressor is responsible for compressing the refrigerant gas into a liquid state. 6. Expansion Valve: The expansion valve regulates the flow rate of the refrigerant gas.
5. Start Relay
1. Thermostat 2. Fan Motor
6. Start Capacitor
5. Start Relay Thermostat A thermostat is used to regulate the temperature of the heating element. It consists of a bimetallic strip a metal strip with two different metals that bends when heated. This bending changes the resistance of the circuit, causing the relay coil to open or close. A thermostat is usually connected to the heating element via a thermal fuse.
7. Temperature Control Thermostat
How do you fix a freezer that is not freezing?
If you are having problems with your Hotpoint chest freezer, you can easily reset it by pressing the power button until the display turns off. Then press the reset button located near the top right corner of the panel. This will clear any errors that were caused during the previous operation.
How do I reset my chest freezer compressor?
If you notice that your chest freezer compressor isn’t working properly, you can try to reset it yourself. To do this, follow these steps: 1. Turn off the power supply to the chest freezer compressor 2. Remove the screws from the back panel 3. Lift the front panel 4. Disconnect the wires 5. Replace the screws 6. Reconnect the wires 7. Turn on the power supply 8. Wait until the compressor turns on 9. Press the “reset” button 10. Let the compressor run for about 30 seconds 11. Check if the compressor is running normally 12. If not, repeat step 10. 13. If everything goes well, replace the screws 14. Close the chest freezer compressor 15. Turn on the power source 16. Wait for the compressor to start 17. Once the compressor starts working normally, turn off the power supply 18.
How do you reset a Hotpoint chest freezer?
Freezers are very important appliances in our homes. It keeps us safe from any type of harm caused by cold weather. But if your freezer does not freeze properly, it could be because of many reasons. One of them is the power supply. So check whether the power supply is working fine or not. Also check whether the thermostat is working fine or not, if it is not working fine then replace it. Check whether the ice maker is working fine or not; if it is not working then replace it. Also check whether the door is closing properly or not. If the door is not closing properly then replace it. And lastly check whether the compressor is working fine or not or not. If it is not working then change the compressor.