JennAir Freezer Not Freezing [How to Fix]?

Last Updated on March 18, 2022

You bought a Jennair refrigerator because it was advertised as having a freezer compartment that would stay cold even after being turned off.
Unfortunately, it seems that the freezer isn’t working properly.
What should you do?
Jennair refrigerators are some of the best selling models in the US.
They offer features such as self-defrosting doors and adjustable shelves.
The company has also received several awards for its innovative designs.
However, despite their popularity, these appliances aren’t always reliable.
In fact, they often fail within five years of purchase.
If you’ve had trouble keeping food frozen or your ice cream from melting, you might want to consider replacing your Jennair fridge

JennAir Freezer Not Freezing – What to Do

If you notice that your freezer isn’t freezing properly, there are several possible reasons why this could happen. It could be because the freezer door is not closed completely. This could allow cold air to enter into the freezer. Try closing the door completely and see if that helps. If it does not help, try opening the door slightly and see if that allows the freezer to get colder. If it still doesn’t freeze, check the thermostat. Make sure that it is set correctly. If it is set incorrectly, the freezer won’t cool down enough to freeze anything. Check the power supply to the freezer. Is the power cord plugged in correctly? Are the lights working? If everything seems fine, call a professional appliance repair service to fix the problem.

1. Check the Condenser Coils

Check the condenser coils. If they are dirty, replace them. Cleaning the coils will improve the efficiency of the unit. 2. Check the Thermostat Answer: Make sure that the thermostat is set correctly. If the temperature is set too low, the freezer will not freeze. If the temperature is too high, the ice maker will run constantly.

2. Check the Start Relay

If the relay is defective, the freezer will not turn on. Replace the relay if necessary. 3. Check the Ice Maker Answer: Make sure that the ice maker is working properly. If the ice maker does not produce enough ice, check the ice tray. If the ice tray is full, remove the ice from the tray and place it back into the ice bin. This will allow the ice maker to continue making ice.

3. Check the Temperature Control Thermostat

Make sure that the thermostat is set correctly. If the thermostat is not set correctly, the freezer will not function properly. 4. Check the Door Lock Answer: Make sure the door lock is locked. If the door lock is unlocked, the freezer will not shut off.

4. Check the Condenser Fan Motor

Check if the condenser fan motor is working. If the condenser fan motor does not work, the freezer will not cool down. 5. Check the Ice Maker Answer: Make sure that the ice maker is turned on. If the ice maker is not turned on, the ice tray will not fill up with ice.

5. Check the Evaporator Fan Motor

Make sure that the evaporator fan motor is working. It is important to check the evaporator fan motor because it helps to remove moisture from the air. If the evaporator fan motor does not work properly, the refrigerator will not dehumidify the air. 6. Check the Refrigeration Compressor Answer: Make sure the refrigeration compressor is working. If the refrigeration compressor does not work, the refrigerator will not function properly.

6. Check the Evaporator Coils

Check the evaporator coils if the evaporator coil is damaged, it will affect the cooling performance of the refrigerator. 7. Check the Water Filter Answer: Make sure that the water filter is clean. If the water filter is clogged, it will affect the flow rate of the water.

JennAir Refrigerator Not Cooling or Freezing – Quick Fix

If you notice that your Jennair refrigerator is not cooling or freezing properly, here are some quick fixes to try. 1. Check if the thermostat is set correctly. Make sure the thermostat is turned off and the unit is plugged into power.

1. Condenser Coils

Check the coils for dust build up. Clean the coils using a vacuum cleaner or brush. 2. Check the air filter. Remove the filter from the back of the freezer and check the filter for clogged areas. Replace the filter if necessary. 3. Check the door seals. Check the doors for any cracks or leaks. Seal any cracks or leaks with caulk.

2. Condenser Fan Motor

1. Check the condenser fan motor for loose connections. Tighten the connection screws. 2. Check for excessive wear on the fan blades. Replace the fan blades if worn.

3. Evaporator Fan Motor

Check the evaporator fan motor for loose connections and replace any damaged parts.

4. Temperature Control Thermostat

Check the thermostat for damage and replace if necessary. 5. Water Valve 6. Drain Line

5. Start Relay

1. Check the power cord for any damage. 2. Check the thermostat for any damage. 3. Check the drain line for any damage. 4. Check the water valve for any damage. 5. Check the start relay for any damage.

7. Thermistor

8. Resistor 9. Potentiometer

Easy Fixes

Thermistors are used to measure the temperature of a liquid or gas. A thermocouple measures the temperature directly. Thermistors are usually placed in a chamber filled with the material being measured. The thermistors change resistance depending upon the temperature of the surrounding medium. Resistors are resistors that are used to regulate current flow. Resistors are used to protect circuits from damage caused by excessive currents. In other words, if there is too much current flowing through a circuit, the resistor will reduce the current. This helps prevent damage to the circuit. Potentiometers are devices that vary the voltage applied to a load. A potentiometer consists of two metal plates separated by a wiper. As the wiper moves across the surface of the metal plates, the resistance between the two plates changes. The position of the wiper determines how much voltage is applied to the load.

1. Power Cord

Power cords are used to connect appliances to power sources. Most power cords are designed to carry electricity safely from the wall socket to the appliance. The cord itself is made of plastic and contains several wires. One wire carries electricity from the wall outlet to the appliance; another wire carries electricity back to the wall outlet. 2. Plug Answer: A plug is a connector that attaches to an electrical outlet. It allows electricity to pass into the appliance. A plug has three prongs. Two of the prongs attach to the outlet while the third prong connects to the appliance.

2. Temperature Setting

Temperature setting refers to how hot the appliance gets. For instance, if you set the oven to 350 degrees Fahrenheit, it will get hot enough to bake cookies. However, if you set the temperature to 450 degrees, the oven will get hotter and could burn something. 3. Timer Answer: A timer lets you know exactly how long to leave the appliance on. This helps prevent burns and other injuries.

3. Door Seal

This prevents moisture from getting into the appliance. It also keeps bugs out. 4. Power Supply Answer: A power supply provides electricity to the appliance. Without a power supply, appliances won’t function properly.

Fits 32 X 55 Max Door Size

5. Water Level Indicator Answer: This indicates how much water is left in the tank.

4. Location

3. Capacity Answer: It explains how many liters of water the tank holds. 2. Power Supply Answer: It explains whether the unit is powered by electricity or gas. 1. Type Answer: It explains what type of product it is.

5. Air Circulation

It explains if the air circulation system is included in the product. 4. Safety Features Answer: It explains if the product comes with safety features. 3. Warranty Answer: It explains the warranty period of the product. 2. Dimensions Answer: It explains dimensions of the product. 1. Color Answer: It explains color of the product.

How do I reset my freezer?

JennAir freezers are very easy to operate. However, if you accidentally set the wrong setting, you can easily reset it. To reset the freezer, simply press the “Reset” button located near the top right corner of the unit. This will clear the current setting and return the freezer to factory default settings.

What should JennAir freezer be set on?

Jennair freezers are designed to maintain frozen food items safely. It is important to know how to operate the freezer properly. This will help prevent damage to the unit and ensure that your food stays safe and frozen. To set the freezer correctly, follow these steps: 1 Set the temperature to 0 degrees Fahrenheit F.

How do you reset a JennAir freezer?

If you have frozen food in your freezer and you want to remove it from the freezer, you need to let it thaw completely. Once it is thawed, you can put it back into the freezer. To avoid damaging your freezer, you need to follow these steps: Remove any ice cubes from the freezer. Put the freezer door back on. Close the door. Wait about 15 minutes. Open the door again. Check if the freezer is working properly. If not, call a professional repair service.

Latest posts by Daisy (see all)

Leave a Comment