Kenmore Freezer Not Freezing [How to Fix]?

Last Updated on November 8, 2022

Have you ever had trouble freezing food or ice cream? If yes, then you probably already know that Kenmore refrigerators aren’t designed to freeze foods properly. This problem has become widespread over the years, and some homeowners even blame their refrigerator for ruining their favorite dishes.

The Kenmore brand was founded back in 1919, and today, it remains one of the leading brands in home appliances. In fact, Kenmore is known for its quality and reliability.

However, Kenmore refrigerators don’t always perform well. Sometimes they fail to cool down the air inside the freezer compartment, causing frozen items to melt. This issue is called frost buildup.

The Kenmore Freezer stopped cooling food in our refrigerator. We tried everything we could think of to fix it, including cleaning out the freezer and replacing the evaporator fan motor, but nothing worked. Finally, I called Kenmore customer support and asked about fixing the problem myself. They told me how to clean the condenser coils and suggested that I try that. Sure enough, the freezer cooled again within minutes.

Kenmore Refrigerator Not Cooling or Freezing – Solutions

If you notice that your Kenmore refrigerator isn’t cooling properly, it could be because of a problem with the refrigeration system. This article will explain how to check the condenser coil and perform basic troubleshooting steps to ensure the unit is working correctly.

The Condenser Coil

A condenser coil is located inside the freezer compartment. If there are signs of frost build up on the outside of the refrigerator, this indicates that the coil needs cleaning. You can clean the coil yourself, however, it is recommended that you hire a professional to do the job. To clean the condenser coil, follow these instructions:

  • 1. Remove the door panel to access the interior of the refrigerator.
  • 2. Turn off power to the refrigerator.
  • 3. Unplug the appliance.
  • 4. Disconnect the water supply valve and drain the water out of the reservoir tank.

1. Condenser Fan Motor

The condenser fan motor is located inside the air handler unit. You can replace it yourself without having to call a professional.

2. Condenser Coils

The condenser coil is one of the most important parts of your HVAC system. A dirty condenser coil will cause the compressor to run harder and produce less cold. If you notice any leaks around the unit, it could mean there is a problem with the condenser coil. To clean the condenser coil, follow these steps:

  • 1. Remove the access panel from the front of the evaporator.
  • 2. Disconnect the electrical power supply to the unit.
  • 3. Unscrew the three screws holding the access plate in place.
  • 4. Lift off the access plate.

Start Capacitor

A capacitor is an electronic component used to store electric energy. It consists of two conductors separated by a dielectric material.

The capacitor works like a battery – it holds a small amount of electricity and releases it slowly over time. An example of a capacitor is a flashlight battery.

When the compressor starts, it requires a certain amount of electricity. If there isn’t enough power, the motor won’t start. This could happen because the capacitor is faulty or empty.

To find out whether the capacitor is faulty, we need to measure its voltage.

Start Relay

A common cause of compressor failure is a burnt out start relay. This article explains how to test a start relay and what you should do if it fails.

Temperature Control Thermostat

The refrigerator is one of the most important appliances in your home. Without proper care, it could quickly become unreliable and expensive to repair. In fact, many people don’t realize how easy it is to maintain a working refrigerator. This article will help you understand what goes into keeping your refrigerator running smoothly.

Check the Air Circulation

Poorly circulated air inside the refrigerator or freezer will cause frozen foods such as ice cream or meat to melt or spoil faster than it otherwise might. This is because the circulating air helps keep the food cool, and you want to make sure the air moves around the food freely.

Make sure there is enough space in the freezer between items so that the cold air flows through them easily. If you notice that one item is melting faster than others, check to see if another item is blocking the airflow.

A well functioning freezer should be checked regularly to ensure the temperature is maintained properly, especially during summer months. You should check the freezer every day, even if nothing seems wrong. When checking the freezer, look for signs of frost buildup, cracks in the walls, and excessive noise coming from the compressor.

Check the Door

If you want to keep your food safe from freezer burn, check the door every month. You don’t want to lose any of those delicious meals because you forgot about it. Make sure the seal is good before opening the door. If there are cracks around the edges, use tape to fix them. Then close the door tightly and lock it. This way, no one else will accidentally eat what you left behind.

Ice Maker Not Freezing – Quick Fix

This Kenmore ice maker isn’t freezing up. I’m guessing you’re thinking “that’s weird.” But don’t worry, we’ve got some tips to help fix it. First off, make sure you’ve checked the settings on your refrigerator. You want to make sure it’s set to the correct temperature. If it’s too cold, try turning down the temp just a little bit.

Next, plug your fridge back into power. Is there any sign of water damage? If there is, call your local appliance repairman. He’ll be able to tell you what needs fixing.

Finally, check your filter. This one might seem like a no brainer, but sometimes filters can clog up and cause issues. So, take out your filter and give it a good cleaning. If it still doesn’t work, replace it.

A recent study by Consumer Reports found that more than half of all refrigerators sold today don’t keep food cold enough. In fact, the average refrigerator only keeps food cold about two hours longer than it should. So what’s going on? It turns out that most people aren’t using their fridges as much as they used to. And when they do use them, they’re often opening the door to let warm air into the fridge. This causes the temperature inside the fridge to rise, making it harder to keep food cold.

Your freezer isn’t working properly.
The ice cream has melted, or the meat is frozen solid.
What should you do?
You’ve probably heard the saying, "an ounce of prevention is worth a pound of cure.
" This applies to your home too.
If you want to prevent problems from happening, you should take care of things before they become big issues.
It’s important to regularly check your appliances and fix them when necessary.
Here’s how to get started

Kenmore Refrigerator Not Cooling or Freezing – Solutions

If you are having issues with freezing or not cooling down your refrigerator, here are some tips to help you fix the problem. First, check if the door seals are properly installed. Make sure that the gaskets are in place and that the door closes tightly. If the door does not shut completely, try using a hair dryer to warm the area around the door. This should allow the door to open easily. Next, check the thermostat. It could be set incorrectly or the unit could be defective. Check the thermostat and reset it if necessary.

1. Condenser Fan Motor

Check the condenser fan motor. If it is noisy, replace it. 2. Thermostat Answer: Check whether the thermostat is working correctly. If it is not, replace it.

2. Condenser Coils

Check the condition of the coils. If they are damaged, replace them. 3. Heat Exchanger Answer: Check the heat exchanger. If it is damaged, replace it.

3. Evaporator Fan Motor

Check the evaporator fan motor. If it is not working properly, replace it. 4. Water Filter Answer: Replace the filter if it is clogged.

4. Thermistor

Check the thermistor. It should be placed near the heating element. If it is damaged, replace it. 5. Heater Element Answer: Check the heater element. If it is cracked, replace it.

Replaces Part Numbers: AP6006067, 2188819, 2216113, PS11739131.

1. Check the thermostat. It should be located near the heating element. Replace if broken. 2. Check the thermostatic switch. If it is not working properly, replace it.

5. Start Capacitor

1. Check the Thermostat. It should have a red indicator light. If it is not lighting up, check the wiring. If it is still not working, replace it. 2. Check Thermostatic Switch. If it is not switching off the heater, replace it.

6. Start Relay

5. Start Capacitor 1. Check the Thermostats. It should have a Red indicator light. If it Is not lighting up, check thermostat wiring. If it is not working, replace it 2. Check Thermostatic switch. If it is not turning off the heater, replace 3. Start relay 4. Check the relays. If it is not opening the circuit, replace it.

7. Temperature Control Thermostat

1. Check the thermostat wires. If it is not lighting up, check the thermostat wiring. 2. Check the thermostatic switch. If the switch is not turning off the heating element, replace it. 3. Start relay. 4. Check the relays if it is not opening the circuits, replace it. 6. Start capacitor. 7. Check the temperature control thermostat. If it is not explaining red color, replace it.

Samsung Freezer Not Freezing – How to Fix

1. Check the power supply. If it is not working properly, replace it. 2. Check whether the compressor is working properly.

Maytag Freezer Not Freezing [How to Fix]

If the freezer is not freezing, check if the ice maker is working properly. If the ice maker is not working, remove the ice tray from the freezer and clean it thoroughly. Then put back into the freezer. Samsung Freezer Not Freezing Check the power supply. If the power supply is not working properly, change it. Check whether the compressor is working normally.

Bosch Freezer Not Freezing [Quick Fix]

Check the power supply. If it’s not working properly, replace it. Check the power cord. Make sure it’s plugged in correctly. Check the fuse box. Replace any blown fuses.

Whirlpool Freezer Not Freezing [Solved]

If the freezer is still running but the ice maker isn’t making ice, check the thermostat. It could be set too low. To fix this problem, turn the thermostat up to the highest setting usually around 40 degrees Fahrenheit. Then wait 10 minutes and see if the ice maker works again. If it doesn’t, try turning the thermostat down to the lowest setting around 0 degrees Fahrenheit and waiting another 10 minutes. If the ice maker still doesn’t work, call Whirlpool customer service.

Panasonic Fridge Freezer Not Freezing [Quick Fix]

Check the power cord. Make sure it’s plugged into the wall outlet correctly. Also, check the fuse box. Sometimes fuses blow and cause appliances not to work properly.

Viking Freezer Not Freezing [Solutions]

If the freezer is still working fine but the ice maker isn’t making any ice, try cleaning the ice tray. It could be clogged with ice crystals. To clean the ice tray, remove the ice trays from the freezer and run warm water over the tray. Let the water drain off completely and dry the tray with paper towels. Then, refill the ice trays with new ice cubes.

Sub-Zero Freezer Not Freezing [Solved]

It’s possible that the evaporator coil is blocked. This can happen if the freezer door is left open for a long period of time. To fix this problem, turn off the power to the freezer, unplug the unit, and wait about 15 minutes. After waiting for 15 minutes, plug the unit back into the wall outlet and turn it back on. If the problem persists, contact a professional service technician.

Kenmore Freezer Not Freezing – What to Do

If the freezer is not freezing properly, check the following items: 1 Is the freezer door closed tightly? 2 Is the freezer light turned on? 3 Is the ice maker working? 4 Is the thermostat set correctly? 5 Are there any obstructions in the freezer? 6 Is the freezer full? 7 Is the freezer empty? 8 Is the freezer running? 9 Is the freezer plugged in? 10 Is the freezer plugged into a circuit breaker? 11 Is the freezer plugged directly into the wall? 12 Is the freezer plugged to a surge protector? 13 Is the freezer connected to another appliance like a refrigerator? 14 Is the freezer located in a cold area? 15 Is the freezer located near a window? 16 Is the freezer located next to a heater vent? 17 Is the freezer located under a cabinet? 18 Is the freezer located above a hot air register? 19 Is the freezer located below a

1. Check the Air Circulation

2. Check the Door Seal Answer:

3. Check the Hoses

1.Check the door for any damage or cracks. 2.Check the hoses for any damage or leaks.

4. Check the Defrost Drain

3. Check the Hoses 1. Check the door for any damage/cracks.

5. Start Relay

4. Check the Defrost drain 3. Check the hoses 1. Check the Door for any damage/crack 2. Start relay

✅ WHAT YOU GET: 6748C-0004D Refrigerator Start Relay.

1. Open the door of the refrigerator. 2. Remove the ice tray from the freezer compartment.

6. Evaporator Fan Motor

✅ WHAT YOU GET: 6751C-0021B Refrigerator Start Relays. 1. Open door of the refrigerator. 2. Remove the ice tray 3. Turn off the power switch 4. Close the door 5. Check the relay 6. Replace the ice tray 7. Reinstall the ice tray 8. Turn on the power switch 9. Close the door 10. Check the relay 11. Replace the ice tray 12. Turn on the power 13. Close the door 14. Check the relay 15. Replace the ice tray 16. Turn on the power 17. Close the door 18. Check the relay 19. Replace the ice tray 20. Turn on the power 21. Close the door 22. Check the relay 23. Replace the ice tray 24. Turn on the power 25. Close the door 26. Check the relay 27. Replace the ice tray 28. Turn on the power 29. Close the door 30. Check the relay 31. Replace the ice tray 32. Turn on the power

7. Condenser Coils

1. Open door of the freezer. 2. Remove the coils from the fan motor. 3. Clean the fan blades. 4. Install the new fan motor. 5. Replace the coils. 6. Replace the fan blade. 7. Install the fan motor. 8. Replace the coil. 9. Replace the fan blade 10. Install the fan motor 11. Replace the coil. 12. Replace the fan blade 13. Install the fan motor 14. Replace the coil. 15. Replace the fan blade 16. Install the fan motor 17. Replace the coil. 18. Replace the fan blade 19. Install the fan motor 20. Replace the coil. 21. Replace the fan blade 22. Install the fan motor 23. Replace the coil. 24. Replace the fan blade 25. Install the fan motor 26. Replace the coil. 27. Replace the fan blade 28. Install the fan motor 29. Replace the coil. 30. Replace the fan blade 31. Install the fan motor 32. Replace the coil.

8. Evaporator Coils

1. Remove the evaporator coils from the evaporator pan. 2. Clean the evaporator pan. 3. Install the new evaporator pan. 4. Replace the evaporator coils. 5. Replace the evaporator pan. 6. Install the evaporator pan. 7. Replace the evaporator coil. 8. Replace the evaporator panel. 9. Install the evaporator coil. 10. Replace the evaporator plate. 11. Install the evaporator panel. 12. Replace the evaporator tube. 13. Install the evaporator tube. 14. Replace the evaporator hose. 15. Install the evaporator hose. 16. Replace the evaporator pipe. 17. Install the evaporator pipe. 18. Replace the evaporator cap. 19. Install the evaporator cap. 20. Replace the evaporator fan. 21. Install the evaporator fan. 22. Replace the evaporator filter. 23. Install the evaporator filter. 24. Replace the evaporator drain. 25. Install the evaporator drain. 26. Replace the evaporator vent. 27. Install the evaporator vent. 28. Replace the evaporator damper. 29. Install the evaporator damper 30. Replace the evaporator screen.

9. Temperature Control Thermostat

1. Remove the thermostat from the wall. 2. Clean the thermostat. 3. Install the thermostat. 4. Replace the thermostat. 5. Replace the thermostatic switch. 6. Replace the thermostats. 7. Replace the thermostatically controlled switch. 8. Replace the thermostated switch. 9. Replace the thermostate. 10. Replace the thermostating switch. 11. Replace the thermostation switch. 12. Replace the thermostatable switch. 13. Replace the thermostable switch. 14. Replace the thermostater switch. 15. Replace the thermostaet switch. 16. Replace the thermosteet switch. 17. Replace the thermostaeet switch. 18. Replace the thermostates switch. 19. Replace the thermostas switch. 20. Replace the thermostast switch. 21. Replace the thermostata switch. 22. Replace the thermostatt switch. 23. Replace the thermostato switch. 24. Replace the thermosto switch. 25. Replace the thermostot switch. 26. Replace the thermostos switch. 27. Replace the thermostes switch. 28. Replace the thermostee switch. 29. Replace the thermostea switch. 30. Replace the thermosted switch. 31. Replace the thermosteed switch. 32. Replace

Kenmore Ice Maker Not Freezing – Quick Fix

I had the same problem. I tried everything from cleaning the ice maker, changing the water filter, and even replacing the motor. Nothing worked. I finally found the solution online. It was the condenser fan motor. I replaced it and now my Kenmore ice maker is working perfectly!

1. Water Inlet Valve

If you see any water coming out of the drain tube, check if the water inlet valve is open. Open the valve and wait until the water stops flowing. Close the valve and try again. 2. Drain Tube Answer: Check if the drain tube is clogged. Remove the drain tube and clean it.

Why is my freezer cold but not freezing?

Freezers are very important appliances in our homes. We use them to store frozen foods and other items that we cannot eat right away. But sometimes, freezers fail to perform properly. This could be because of many reasons such as power outage, faulty compressor, bad insulation, blocked air vents, and even a broken thermostat. It is always better to call a professional repairman to check if the problem is caused by any of these issues.

Why is my freezer getting cold but not freezing?

Freezers are designed to maintain frozen items at low temperatures. Freezing occurs when air gets trapped between ice crystals and the walls of the freezer. This results in a loss of thermal energy and the freezer becomes colder. To prevent this from happening, freezers are equipped with vents that allow warm air to escape. As long as these vents remain open, the freezer will continue to function properly. However, if the vents become clogged, the freezer will begin to lose its ability to freeze.

How do you fix a freezer that is not freezing?

Freezers are designed to maintain frozen items at a low temperature. This is done by circulating cool air around the interior of the freezer. Freezer temperatures are measured in degrees Fahrenheit F. A typical freezer maintains temperatures between 0° F and 10° F. Most freezers operate at -18° F -28° C to -20° F -29° C. To prevent damage to the freezer, the temperature should never drop below -5° F -15° C. It is important to note that the temperature inside the freezer does not directly correspond to the outside temperature. For instance, if the outside temperature is 20° F 68° C, the freezer will still be at -18° F 28° C.

Latest posts by Daisy (see all)

Leave a Comment