Panasonic Refrigerator Leaking [How to Fix]?

Last Updated on March 18, 2022

Have you ever had a refrigerator leak water inside your home?
If yes, then you probably know how annoying it is.
The leaking fridge is a common problem faced by homeowners across the globe.
Fridge leaks happen due to several reasons.
One of them is a faulty compressor or condenser fan motor.
Another reason is a damaged gasket.
In some cases, the cause of the leakage might be a loose connection between the evaporator coil and the drain pan.
To prevent such problems from happening again, it is important to check the appliance regularly.
This way, you can identify the issue before it gets worse

Panasonic Refrigerator Leaking – What to Check

If you notice any leaking from the refrigerator, check if the compressor is working properly. It could be that the compressor is not running smoothly. This problem can occur because of the refrigerant gas leaks. To fix this issue, you need to replace the old refrigerant with new one.

1. Defrost Drain

Defrost drain is located at the bottom of the freezer. It is used to remove ice build-up during the defrost cycle. If the defrost drain is clogged, then you need to clean it using a brush. 2. Door Seal Answer: If the door seal is damaged, then you need to replace it.

2. Drain Pan

If the drain pan is not working properly, then you need to change it. 3. Freezer Light Bulb Answer: Replace the bulb if it does not light up.

3. Water Line

Check the water line for leaks. 4. Microwave Oven Door Handle Answer: Check the handle for cracks and replace if necessary.

i. Loose Connections

Replace any loose connections. ii. Broken Glasses Answer: Replace broken glasses.

ii. Air in the Water Line

Remove air from the water line. iii. Leaking Faucet Answer: Repair leaking faucets.

iii. Water Line has a Tear or is Bent

Check the pipe for cracks or bends. iv. Leakage Under Sink Answer: Check under sink for leaks.

4. Water Filter

Water filters are used to remove impurities from tap water. It is important to know what type of filter you need based on the quality of water coming into your house. For instance, if you live in an area where the water contains heavy metals such as lead, arsenic, mercury, copper, zinc, cadmium, chromium, nickel, manganese, iron, fluoride, chlorine, bromine, iodine, radon, and other chemicals, you need a water filtration system that removes these contaminants.

5. Water Filter Housing

A water filter housing is a part of the water filter that holds the filter media. It is usually made of plastic and comes in different shapes and sizes depending on the manufacturer. A water filter housing is designed to protect the filter media from damage caused by impact or abrasion. It also helps prevent the flow of water around the filter media. 6. Filter Media Answer: Filter media is the material that actually removes contaminants from water. It is composed of granules, fibers, or particles that trap contaminants. The most common types of filter media are activated carbon, ion exchange resin, and ceramic beads. Activated carbon is the most popular type of filter media because it is inexpensive and effective. Ion exchange resins are used when the water contains hard minerals such as calcium and magnesium. Ceramic beads are used when the water is very acidic or alkaline.

How to Replace the Water Filter Housing of Panasonic Refrigerator

1 Remove the screws holding the water filter housing in place. 2 Pull the water filter housing away from the refrigerator.

6. Door Gasket

Panasonic refrigerators have two types of door gaskets. One type is located under the handle of the door and the other type is located between the door and the refrigerator body. To replace the door gasket, remove the screws from the bottom of the door handle. Then pull the door handle upward and remove the old gasket. Next, install the new gasket into the same location. Put the screws back into the holes and tighten them.

How to Replace Panasonic Refrigerator Door Gasket

To replace the door gasket of the refrigerator, first remove the screws from the lower part of the door handle. Pull the door handle upward and take off the old gasket. Install the new gasket into place and put the screws back into the hole. Tighten the screws.

7. Water Inlet Valve

To check if the water inlet valve is working properly, turn the water faucet on and see if water comes out. If not, check the valve to see if it is leaking. Turn the valve clockwise until water flows freely. Then tighten the screw. 8. Water Filter Answer: Remove the filter cartridge and clean the screen using a soft cloth. Clean the filter cartridge again after replacing it.

How do I stop my refrigerator from leaking?

Refrigerators are designed to maintain items cold. It does this by using cool air to absorb heat from the inside of the fridge. This process works well but if the compressor breaks down, the refrigerant gas expands and leaks out of the system. This can cause moisture to build up around the evaporator coils. As the coils get wet, they stop working properly and the cooling effect decreases. Moisture builds up and eventually drips out of the bottom of the unit.

How do you unclog a defrost drain on a refrigerator?

If you notice that the defrost drain on your refrigerator is clogged, you can try using a plunger to remove any ice buildup. However, if the drain line is completely blocked, you will need to call a professional plumber to fix it.

What causes a refrigerator to leak water from the bottom?

Refrigerators leak because of two reasons; either the gaskets are not properly installed or the seals are damaged. To prevent leaks, check the gasket around the door every year. It is recommended to replace the gaskets every three years. Also, if the compressor is noisy, try cleaning the condenser coils. This will help to reduce the noise level.

Daisy Kim
Latest posts by Daisy Kim (see all)

Leave a Comment