Whirlpool Fridge Freezing Food [Quick Fix]

Last Updated on March 18, 2022

You’ve got a fridge full of food that’s starting to go bad.
What do you do?
The answer might surprise you.
If you don’t want to throw away perfectly good food, you’ll need to freeze it.
There are several ways to store food safely in the freezer, but some methods are better than others.
# There are two main types of freezing containers: airtight and watertight.
Airtight containers prevent oxygen from reaching the food, which helps preserve its freshness.
Watertight containers trap moisture inside the container, keeping foods safe from bacteria growth.
Whichever type you choose, you should follow these simple steps to ensure your food stays frozen

How to Stop Whirlpool Fridge from Freezing Food

Whirlpool fridges are very useful appliances. But sometimes, they freeze food. This happens because the fridge is not properly set. It needs to be set correctly. So if you see frozen food in your refrigerator, check whether the freezer is working fine. Also, check whether the door is closed tightly. If you notice any problem, call a professional immediately.

1. Dirty Condenser Coils

If you see dirty coils, clean them using a brush. Cleaning the coils helps in cooling down the air. 2. Cold Air Outlets Answer: Cold air outlets help in keeping the cold air inside the fridge. If you see that the cold air is coming out of the outlet, turn off the power supply and open the door. Then, shut the door again.

2. Blocked Vents

Blocked vents can be cleaned easily. Just remove the filter from the vent and clean it using a brush. 3. Water Leaks Answer: Water leaks can be repaired easily. Remove the leaky part and replace it.

3. Fridge Temperature is Set Too Low

Set the fridge temperature to 5 degrees Celsius lower than what you usually set it to. This way the cold air will not get blocked and the fridge will cool down faster. 4. Food Spoilage Answer: Check if the food is spoiled. If yes, throw away immediately.

4. Faulty Temperature Control Thermostat

Check the thermostat. It could be faulty. 5. Dirty Filter Answer: Clean the filter.

How to Replace a Whirlpool Fridge Thermostat Control

1. Remove the panel from the front of the refrigerator. 2. Unscrew the screws holding the back cover to the bottom of the refrigerator.

6. Malfunctioning Thermistor

Defective damper control assembly 7. Malfunctioning Thermostat 8. Malfunctioning Timer

How to Diagnose a Whirlpool Fridge Thermistor

1 Check the thermostat. It should read between 40°F and 120°F 4°C to 49°C. If it reads below 40°F, replace the thermostat. If it reads above 120°F, replace the thermistor. 2 Check the damper control assembly. It should open and close smoothly. If not, replace the damper control assembly

Click Here to Buy Yours Now!

A refrigerator thermistor is a component found in many refrigerators. It measures the temperature of the air inside the fridge. A thermistor is usually located near the evaporator coils. If the thermistor is defective, the refrigerator won’t cool properly. This could result in spoiled food if the refrigerator isn’t working correctly. To check the thermistor, remove the back panel of the refrigerator and locate the thermistor. It’s usually located next to the evaporator coil.

7. Malfunctioning Temperature Control/Main Control Board

8. Refrigerator Door Sensor 9. Water Filter

How do I stop my Whirlpool refrigerator from freezing food?

To check if the thermostat is working properly, open the door and turn off the power switch. Then, press the button until the display explains “OFF”. Press the button again to turn the unit back on. If the display still says “ON”, the thermostat needs to be replaced.

Why is my Whirlpool fridge freezing things?

Fridge freezers are designed to maintain items cool for long periods of time. This is done by using a refrigeration system that circulates cold air around the interior of the refrigerator. Fridges are not meant to store perishable items such as meat or fish. These items should be stored in a freezer instead. However, if you have frozen food in your fridge, it could be causing the problem. The freezer section of your fridge needs to be cleaned every month. It is recommended that you clean the freezer after each meal to prevent any buildup of ice crystals.

How do I reset the thermostat on my Whirlpool refrigerator?

To reset the thermostat, turn off the power switch, unplug the unit from the wall outlet, remove the back panel, and then press down on the top right corner of the thermostat until it clicks into place. Then plug the unit back into the wall outlet.

Why is my fridge suddenly freezing everything?

If you notice that your refrigerator is freezing items, it could be because of a problem with the thermostat. This is a common issue with Whirlpool refrigerators. It is recommended to call a professional repair service to fix the problem.

How do you check a Whirlpool refrigerator thermostat?

If you notice that your refrigerator is not keeping your food cold enough, you can try adjusting the temperature setting. To adjust the temperature, go into the Settings menu and select Temperature Control. Then scroll down until you see the option for Refrigerator Temperature. Adjust the temperature to the desired level. Make sure that the door is closed after making any adjustments.

Daisy Kim
Latest posts by Daisy Kim (see all)

Leave a Comment